BFWJC - SILICONE ALKYD ENAMEL,HAZE GRAY
- MSDS: BFWJC
- Manufacturer: PRO LINE PAINT COMPANY
- Product Name: SILICONE ALKYD ENAMEL,HAZE GRAY
- National Stock Number: 8010-00-917-2256
Product Identification
Product ID:SILICONE ALKYD ENAMEL,HAZE GRAY
MSDS Date:01/01/1985
FSC:8010
NIIN:00-917-2256
MSDS Number: BFWJC
Responsible Party
Emergency Phone: 714-232-8968
Cage: MO227
Contractor
Telephone: 619-231-2313; 619-232-8968
Cage: 9D157
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 15%
OSHA PEL 100 PPM
Hazards
Effects of Overexposure:INHAL: NOSE/THROAT IRRIT. SKIN: IRRIT OR NERVE
DAMAGE. VOMIT & DIZZ MAY BE CAUSED BY INTOXICATION.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. SKIN: WASH W/ SOAP & FLUSH. OFF
W/WATER FO 5 MIN. REMOVE & WASH CONTAMINATED CLOTHES BEFORE REUSE.
Fire Fighting
Flash Point:300F;149C; CC
Lower Limits:0.77
Upper Limits:6
Extinguishing Media:WATERFOG,CO*2,DRY CHEM
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES PROVIDE SUFFICIENT
VENT. WEAR RESPIRATOR USE SKIN PROTECTORS & NON-SPARKING TOOLS
Handling
Handling and Storage Precautions:KEEP AWAY FROM OPEN FLAMES & HEAT. DO
NOT STORE MATERIALS AT TEMPERATURES ABOVE 85F. PROTECT FROM
COMBUSTION.
Other Precautions:EQUIP SOTRAGE AREAS W/FIRE EXTINGUISHERS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD AIR-FED HOOD/AIR RESPIRATOR IN
CONFINED AREA (MFR)
Ventilation:GENERAL-SUCTION FAN TO KEEP BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES
Supplemental Safety and Health
COLOR 26270. CONTAINER: 5 GALLON CAN
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:300F;149C
Vapor Pres:6.9
Vapor Density:3.9
Spec Gravity:1.42
Evaporation Rate & Reference:1.5 (BUAC=1)
Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:15
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH HEAT & OPEN FLAMES, KEEP OUT OF
SUNLIGHT.
Hazardous Decomposition Products:CO,CO*2, ZINC OXIDE.
Disposal
Waste Disposal Methods:MFR RECOMMENDS DUMPING SPILLED MATERIAL IN
CONTAINERS & CLOSING IMMED. DISPOSE IAW FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.